*
Highly accurate pressure transmitter 0.2% R.O. as a standard by SOS technology.  including Non-linearity, Hysteresis and Repeatability.)
0.1 % R.O. is also available as a high accurate type.
û High reliability and durability by SOS technology.
û Can correspond to the absolute pressure and compound pressure
û Small size and light weight

û
Wide range pressure from 200kPa to 50MPa can be measure.
û Three kinds ( Cable directly connected type) , ( connector type) and ( terminal box type)

Specifications
Rated capacity 200 kPa ~ 50 MPa
Safe overload 200 % R.C.
Ultimate overload 300 % R.C.
Accuracy 0.2 % R.O. ( including non-linearity, hysteresis and repeatability)
Rated output Current : 4 mA ~ 20 mA ( 2 wires method, Load resistance 500 ohm or less, at 24 V)
Voltage : 0 V ~ 5 V, 0 V ~ 10 V ( Load resistance 5 k-ohm or more)
Response frequency 1 kHz
Power supply voltage DC 24 V( 18 V ~ 28 V)
Power consumption Approx. 20 mA
Insulation resistance 1 000 M© or more ( DC 50 V)
Temp. range, compensated -20  ~ 70 
Temp. range, safe -30  ~ 80 
Temp. effect on zero 0.2 % R.O./ 10 
Temp. effect on output 0.2 % LOAD/ 10 
Cable Æ 4.7, 2 m shielded cable directly attached,
Cable end separated ( Cable attached type)
Connector R03-RB5F( receptacle) ( Connector type)
Class of protection IP55 or equivalent ( Cable attached type or terminal box type)
IP44 or equivalent( Connector type)
Material of pressure hole Stainless steel
Material of cover Alluminium alloy ( with almite processing)
Material of pressure diaphragm Single crystal sapphire, etc.,
Mounting screw G3/ 8{ PF} , R3/ 8{ PT}
( Please contact us for mounting screw of 1/ 8 and 1/ 4.)
Weight Cable attached type and connector type : Approx. 200 g
Terminal box type : Approx. 400 g
Tightening torque 20 Nem ~ 40 Nem { 2.04 kgfem ~ 4.08 kgfem}
Special specification

NS100A-D6 : Guranteed accuracy 0.2 % R.O. at negative side. Power supply voltage : ± DC15 V
NS100A-H : As an amplifier part is are separated.( The highest, environmental temperature is 200  )

NS100A-S : IP67 waterproof construction with zero adjustment factor)
NS102 : Pressure inlet port : Æ 10